A Basic Idea about Extruded Aluminum

Extrusion is a process that works to change their shapes and forms on different kinds of metals. Extruded aluminum is the most common product of this method. You can create many things from extruded aluminum by punching a number of hollow cavities through it or putting several slots so that you can place bars or any material to connect it to one or more of it.

You should apply heat to Extruded Aluminum so that it would melt. You can make use of several tools and machineries to help you with the whole process.

There are various types of extrusion - hot extrusion, cold extrusion and warm extrusion. To ensure that material is soft and will not harden easily, the temperature is kept at a high level in hot extrusion. It is the most expensive among the three types as hydraulic presses are often used in this type of process.

At a level that is equal or below the room temperature the temperature is maintained in cold extrusion. To make the finished products like Aluminum Channel have higher strength and good surface finishes this is done. Examples of materials commonly used in cold extrusion are copper, Steel, aluminum, lead, vanadium, titanium, tin and molybdenum.

The other commonly used metals that can be extruded are the following:

• Copper - used in making tubes, wire, cable sheathing and pipes
• Steel - used in tracks and rods
• Magnesium - used to manufacture nuclear industry parts and aircraft parts
• Tungsten carbide - advisable to use because of its durability and toughness
• Zinc - used in handrails, tubes, bar, rods, fitting and many hardware components
• Lead - used in making wire, pipes, cable sheathing and tubes
• Tin - also used in the same way as lead and copper
• Titanium - used to manufacture engine rings, seat tracks for airplanes and other structural components